The demand for solar power has witnessed a steep hike over the past decade in India and other parts of the world. More and more nations are capitalizing on the adoption of this source of sustainable and clean energy. Homeowners, private companies, educational institutes, government agencies, and more sectors are getting the best quality solar systems installed on the ground or rooftops of their buildings.
For the successful functioning of a solar panel and proper power production, the installation must be performed perfectly. The mounting structure must be given huge importance during installation as anything wrong in the structure can affect the whole solar project. Learning about the mounting structure is important before you wonder is solar power for you? Keep scrolling down to gather the best information regarding solar mounting structure.
Importance of solar panel mounting structure
Most people often ignore solar mounting and racking systems. They are mainly concerned about solar power production. But, the racking and monitoring systems of solar panels are as important as the panels. Wondering why? The following listed benefits will clear your doubt.
- Solar panel mounting structure helps in installing the panels safely and appropriately.
- Provides a stable base for the solar panel.
- The mounting structures are featured to withstand any rough environmental conditions.
- A strong mounting structure protects solar panels from any potential damage.
- It helps in reducing maintenance costs as the mounting structure doesn’t need higher maintenance. Hence, just getting an annual maintenance contract for solar system is enough, eliminating extra maintenance and repair charges.
- The right angle of the structure allows solar panels to absorb maximum solar irradiation.
- The mounting structure is possible for the small space occurrence.
- The efficient design of the structure improves the ability to produce more power with a solar panel system.
- Easier and faster installation process.
- Longer life sustainability.
Types of solar mounting systems
There are different types of solar mounting systems based on the installation type. Let’s discover the basic ones –
Rooftop mounting systems
These systems are designed to keep solar panels in the appropriate position. They are available in 2 varieties – flush and tilt. Flush systems install the panels straight on the rooftop while tilt systems tilt the panel to an appropriate angle.
Single-pile PV solar ground-mounted structures
These systems provide the best solution to solar panels installed on the ground using a single pile. The panel array is supported by a piling, drilled into the ground.
Double-pile PV solar ground-mounted structures
These structures support the panels by two piles. They are primarily used for large installations or in areas where the ground conditions need a more solid base.
This type of solar panel tracking system tilts the panel along a single axis to examine the course of the sun across the sky. The tracking system can change the angle of the panel using a motor and controller to increase sunlight exposure.
This tracking system allows the solar panel to be tilted along 2 axis – east-west and north-south to more correctly follow the path of the sun. These trackers cost more than a single-axis but generate up to 40% more power.
Rope rack mounting structure
This type of mounting system provides an adaptable and safe mounting option by installing the panels in the right place using cables or ropes. Situations that need a flexible mounting solution can benefit these systems as they can be put on sloped or uneven terrain.
Floating solar mounting structures
As the name says, this type of mounting system allows solar panels to install on the surface of water bodies like reservoirs, seas, ponds, or lakes. They are placed on platforms that float above the water, making the best use of the water sources that otherwise remain underutilized or unused.
Important parameters to consider before installing solar mounting structures
When installing a solar panel mounting system or structure, keep the following parameters into consideration –
For a fixed roof-mounted solar system, the angle and latitude of the installation site must be equal. Between 30-45 degrees pitch angles are perfect for most locations.
Before installation, check the longitudinal and latitudinal location of your site because different parts of the planet receive different amounts of sunlight in different lengths of time. You may use Google Maps to locate your location’s latitude and longitude.
South is the best direction that solar panels must face to absorb the maximum sunlight. East and west directions are also good but don’t go for the North direction as it will not work properly.
Be sure that there must be a shade-free area on the surface where you need the installation as any tall trees or structures can cause obstacles in capturing enough sunlight. The systems work more perfectly when there is no shade falling upon them.
The surface of the solar mounting structure must be sturdy and smooth to easily handle the weight of the entire solar system throughout its lifespan.
Solar panel supplier
Even though a solar mounting structure installation seems easier, to ensure proper installation, it is essential to hire the best rooftop solar system providers in Delhi NCR who test the structure for you to ensure safe use. The trained expert can customize the stand according to the specific requirements of the solar panel. They will guide you for the installation of the mounting structure at a certain position from where you can obtain the maximum benefit of your solar panel.
At the bottom line, a solar system mounting structure is essential to place your solar system in the right position to receive maximum sunlight and enhance its durability by preventing any possible damage. Buy a mounting structure made using best-grade quality material and get its installation from a reliable installer considering angle, location, direction, and other parameters into consideration.